Ronde & Schwarz 1304.0004.03, Руководство пользователя

Страница: 489 / 1076

Data Management
R&S
®
FPL1000
489 User Manual 1178.3370.02 ─ 09
Date
Adds the current date to each page of the report.
Remote command:
HCOPy:TREPort:TDSTamp[:STATe]
on page 951
Page Count
Adds page numbers to each page of the report.
Remote command:
HCOPy:TREPort:PAGecount:STATe
on page 951
Report Path
Defines the name of the report and the location where the report file is to be saved.
Enter the path and filename in the input field, or select the directory using the "..." but-
ton.
If you omit the path, the report is saved in the default directory (C:\Users\Public\Docu-
ments\Rohde-Schwarz\Analyzer\user).
Note : This path defines the location of the actual test report. Templates are stored in a
different location (see "Save" on page 496).
Remote command:
MMEMory:NAME
on page 922
Suppress Dialog ← Report Path
By default, when you store a report, a dialog is displayed to define the storage path.
If the dialog is suppressed, reports are saved to the default directory (C:\Users\Public
\Documents\Rohde-Schwarz\Analyzer\user) with a generic name without further inter-
action.
Raw Data Storage
Defines the location where the measurement data sets for the report are stored until
the report is created.
Enter the path and filename in the input field, or select the directory using the "..." but-
ton.
8.5.1.2 Title Page
Access : > "Report menu" > "Templates" > "General" > "
▽
" > "Title Page"
You can define an optional title page for the test report with a title and a short descrip-
tion of the report contents. It is only included in the report if you enable it.
Working with Test Reports