Ronde & Schwarz 1304.0004.03, Руководство пользователя

Страница: 930 / 1076

Remote Commands
R&S
®
FPL1000
930 User Manual 1178.3370.02 ─ 09
Example:
INST:SEL 'SPECTRUM2'
//Selects channel setup 'SPECTRUM2'.
MMEM:STOR:TYP CHAN
//Specifies that channel setup data is to be stored.
MMEM:STOR:STAT 1, 'C:\Analyzer\Spectrum'
//Stores the settings from channel setup
//'SPECTRUM2' to the file 'C:\Analyzer\Spectrum'.
MMEM:LOAD:TYPE NEW
//Specifies that channel setups are to be loaded
//in a new channel setup.
MMEM:LOAD:STAT 1, 'C:\Analyzer\Spectrum'
//Loads the channel setup from the file
//'C:\Analyzer\Spectrum' to the new channel setup
//'SPECTRUM2*'.
MMEMory:STORe<1|2>:STATe <1>, <FileName>
This command saves the current instrument configuration in a *.dfl file.
Suffix:
<1|2>
.
irrelevant
Parameters:
<1>
<FileName> String containing the path and name of the target file.
The file extension is .dfl.
Example: MMEM:STOR:STAT 1,'Save'
Saves the current instrument settings in the file
Save.dfl
.
Manual operation: See "Save File" on page 463
See "Save" on page 530
MMEMory:STORe<1|2>:STATe:NEXT
This command saves the current instrument configuration in a *.dfl file.
The file name depends on the one you have set with
MMEMory:STORe<1|2>:STATe
on page 930. This command adds a consecutive number to the file name.
Suffix:
<1|2>
.
irrelevant
Example: MMEM:STOR:STAT 1,'Save'
Saves the current instrument settings in the file
Save.dfl
.
MMEM:STOR:STAT:NEXT
Saves the current instrument settings in the file
Save_001.dfl
MMEM:STOR:STAT:NEXT
Saves the current instrument settings in the file
Save_002.dfl
Manual operation: See "Save File" on page 463
Managing Settings and Results