Ronde & Schwarz 1304.0004.03, Руководство пользователя

Страница: 620 / 1076

Remote Commands
R&S
®
FPL1000
620 User Manual 1178.3370.02 ─ 09
INSTrument:CREate:REPLace <ChannelName1>,<ChannelType>,<ChannelName2>
This command replaces a channel setup with another one.
Setting parameters:
<ChannelName1> String containing the name of the channel setup you want to
replace.
<ChannelType> Channel type of the new channel setup.
For a list of available channel setup types see
INSTrument:
LIST?
on page 620.
<ChannelName2> String containing the name of the new channel setup.
Note: If the specified name for a new channel setup already
exists, the default name, extended by a sequential number, is
used for the new channel setup (see
INSTrument:LIST?
on page 620).
Channel names can have a maximum of 31 characters, and
must be compatible with the Windows conventions for file
names. In particular, they must not contain special characters
such as ":", "*", "?".
Example: INST:CRE:REPL 'IQAnalyzer2',IQ,'IQAnalyzer'
Replaces the channel setup named "IQAnalyzer2" by a new
channel setup of type "IQ Analyzer" named "IQAnalyzer".
Usage: Setting only
Manual operation: See "Replace Current Channel Setup" on page 83
INSTrument:DELete <ChannelName>
This command deletes a channel setup.
Setting parameters:
<ChannelName> String containing the name of the channel setup you want to
delete.
A channel setup must exist in order to be able delete it.
Usage: Setting only
Manual operation: See "Closing a channel setup" on page 83
INSTrument:LIST?
This command queries all active channel setups. This is useful in order to obtain the
names of the existing channel setups, which are required in order to replace or delete
the channel setups.
Return values:
<ChannelType>,
<ChannelName> For each channel setup, the command returns the channel setup
type and channel setup name (see tables below).
Tip: to change the channel setup name, use the
INSTrument:
REName
command.
Selecting the Operating Mode and Application