Ronde & Schwarz 1304.0004.03, Руководство пользователя

Страница: 441 / 1076

The Spectrum Application (RF Measurements)
R&S
®
FPL1000
441 User Manual 1178.3370.02 ─ 09
X-Lock ← Measurement Zoom
If activated, the x-axis of the diagram is not changed during subsequent touch ges-
tures.
Y-Lock ← Measurement Zoom
If activated, the y-axis of the diagram is not changed during subsequent touch ges-
tures.
Adapt Measurement to Zoom (selected diagram) ← Measurement Zoom
If you already performed a graphical zoom using the "Single Zoom" on page 439 or
"Multi-Zoom" on page 440 functions, this function automatically adapts the measure-
ment settings to maintain the currently zoomed display.
Restore Original Display
Restores the original display, that is, the originally calculated displays for the entire
capture buffer, and closes all zoom windows.
Note: This function only restores graphically zoomed displays. Measurement zooms,
for which measurement settings were adapted, are recalculated based on the adapted
measurement settings. In this case, the zoomed display is maintained.
Remote command:
Single zoom:
DISPlay[:WINDow<n>][:SUBWindow<w>]:ZOOM[:STATe]
on page 813
Multiple zoom:
DISPlay[:WINDow<n>][:SUBWindow<w>]:ZOOM:MULTiple<zn>[:STATe]
on page 814 (for each multiple zoom window)
7.12.3 How to Zoom Into a Diagram
The remote commands required to zoom into a display are described in Chap-
ter 11.8.6, "Zooming into the Display" , on page 811.
The following tasks are described here:
●
"To zoom into the diagram at one position" on page 442
●
"To return to original display" on page 442
●
"To zoom into multiple positions in the diagram" on page 442
●
"To maintain a zoomed display permanently" on page 443
For information on how to zoom into a diagram using touch gestures and change the
display permanently, see
Chapter 5.4.4, "Touchscreen Gestures" , on page 74.
Zoomed Displays