Ronde & Schwarz 1304.0004.03 Скачать руководство пользователя страница 30

Страница: 30 / 1076

Getting Started

R&S

FPL1000

User Manual 1178.3370.02 ─ 09

5.1.14

Considerations for Test Setup

Cable selection and electromagnetic interference (EMI)

Electromagnetic interference (EMI) can affect the measurement results.

To suppress electromagnetic radiation during operation:

●

Use high-quality shielded cables, for example, double-shielded RF and LAN
cables.

●

Always terminate open cable ends.

●

Ensure that connected external devices comply with EMC regulations.

Preventing electrostatic discharge (ESD)

Electrostatic discharge is most likely to occur when you connect or disconnect a DUT.

►

NOTICE!

Risk of electrostatic discharge. Electrostatic discharge can damage the

electronic components of the product and the device under test (DUT).
Ground yourself to prevent electrostatic discharge damage:

a) Use a wrist strap and cord to connect yourself to ground.
b) Use a conductive floor mat and heel strap combination.

Signal input and output levels

Information on signal levels is provided in the data sheet. Keep the signal levels within
the specified ranges to avoid damage to the R&S

FPL1000 and connected devices.

5.2

Instrument Tour

5.2.1

Front Panel View

This chapter describes the front panel, including all function keys and connectors.

Instrument Tour

Содержание 1304.0004.03





















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 1304.0004.03

Отзывы:

Бренды по названию

Популярные бренды

Ronde & Schwarz 1304.0004.03, Руководство пользователя

Результаты поиска

Содержание 1304.0004.03

Отзывы:

Бренды по названию

Популярные бренды