Ronde & Schwarz 1304.0004.03, Руководство пользователя

Страница: 96 / 1076

The Spectrum Application (RF Measurements)
R&S
®
FPL1000
96 User Manual 1178.3370.02 ─ 09
7.2 Measurements and Results
Access : "Overview" > "Select Measurement"
Or : [MEAS]
In the Spectrum application, the R&S FPL1000 provides a variety of different measure-
ment functions.
●
Basic measurements - measure the spectrum of your signal or watch your signal
in time domain
●
Power measurements - calculate the powers involved in modulated carrier signals
●
Emission measurements - detect unwanted signal emission
●
Statistic measurements - evaluate the spectral distribution of the signal
●
Special measurements - provide characteristic values of the signal
●
EMI measurements - detect electromagnetic interference in the signal
The individual functions are described in detail in the following chapters.
The measurement function determines which settings, functions and evaluation meth-
ods are available in the R&S
FPL1000. The various measurement functions are descri-
bed in detail here.
When you select a measurement function, the measurement is started with its default
settings immediately and the corresponding measurement configuration menu is dis-
played. The measurement configuration menu can be displayed at any time by press-
ing the [MEAS CONFIG] key.
The easiest way to configure measurements is using the configuration "Overview", see
Chapter 7.1, "Configuration Overview" , on page 94.
In addition to the measurement-specific parameters, the general parameters can be
configured as usual, see
Chapter 7, "The Spectrum Application (RF Measurements)" ,
on page 94. Many measurement functions provide special result displays or evaluation
methods; however, in most cases the general evaluation methods are also available,
see
Chapter 7.2.2, "Basic Evaluation Methods" , on page 117.
In addition to the measurement-specific parameters, the general parameters can be
configured as usual, see
Chapter 7.1, "Configuration Overview" , on page 94. Many
measurement functions provide special result displays or evaluation methods; how-
ever, in most cases the general evaluation methods are also available, see
Chap-
ter 7.2.2, "Basic Evaluation Methods" , on page 117.
The remote commands required to retrieve measurement results are described in
Chapter 11.8.7.4, "Retrieving Trace Results" , on page 831.
● Basic Measurements ...............................................................................................97
● Basic Evaluation Methods ..................................................................................... 117
● Power Sweep Measurements ............................................................................... 119
● Channel Power and Adjacent-Channel Power (ACLR) Measurement ..................127
● Carrier-to-Noise Measurements ............................................................................149
● Occupied Bandwidth Measurement (OBW) .......................................................... 152
● Spectrum Emission Mask (SEM) Measurement ................................................... 159
● Spurious Emissions Measurement ........................................................................199
Measurements and Results