manualshive.com logo in svg

Ronde & Schwarz 1304.0004.03, Руководство пользователя

Поделиться
Скачать
Ronde & Schwarz 1304.0004.03 Скачать руководство пользователя страница 35

Getting Started

R&S

®

FPL1000

35

User Manual 1178.3370.02 ─ 09

5.2.1.6

 

Keypad

The keypad is used to enter numeric parameters, including the corresponding units. It
contains the following keys:

Table 5-4: Keys on the keypad

Type of key

Description

Decimal point

Inserts a decimal point "." at the cursor position.

Sign key

Changes the sign of a numeric parameter. For alphanumeric parame-
ters, inserts a "-" at the cursor position.

Unit keys

(GHz/-dBm MHz/dBm, kHz/dB,
Hz/dB etc.)

Adds the selected unit to the entered numeric value and complete the
entry.

For level entries (e.g. in dB) or dimensionless values, all units have the
value "1" as multiplying factor. Thus, they have the same function as an
[ENTER] key.

[ESC]

Closes all kinds of dialog boxes, if the edit mode is not active. Quits the
edit mode, if the edit mode is active. In dialog boxes that contain a "Can-
cel" button it activates that button.

For "Edit" dialog boxes the following mechanism is used:

●

If data entry has been started, it retains the original value and
closes the dialog box.

●

If data entry has not been started or has been completed, it closes
the dialog box.

(BACKSPACE)

If an alphanumeric entry has already been started, this key deletes the
character to the left of the cursor.

[ENTER]

●

Concludes the entry of dimensionless entries. The new value is
accepted.

●

With other entries, this key can be used instead of the "Hz/dB" unit
key.

●

In a dialog box, selects the default or focused element.

5.2.1.7

 

Navigation Controls

The navigation controls include a rotary knob and navigation keys. They allow you to
navigate within the display or within dialog boxes.

Navigating in tables

The easiest way to navigate within tables (both in result tables and configuration
tables) is to scroll through the entries with your finger on the touchscreen.

Rotary Knob

The rotary knob has several functions:

●

For numeric entries: increments (clockwise direction) or decrements (counter-
clockwise direction) the instrument parameter at a defined step width

●

In lists: toggles between entries

Instrument Tour

Содержание 1304.0004.03





















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды