manualshive.com logo in svg

Ronde & Schwarz 1304.0004.03, Руководство пользователя

Поделиться
Скачать
Ronde & Schwarz 1304.0004.03 Скачать руководство пользователя страница 744

Remote Commands

R&S

®

FPL1000

744

User Manual 1178.3370.02 ─ 09

Parameters:

<TimeOffset>

Defines a time offset to start the measurement at the first pulse
of a trace.
*RST: 

0

Default unit: s

<MeasTime>

Defines the measurement time.
Default unit: s

<PulsePeriod>

Defines the pulse period.
Default unit: s

<OfPulses>

Defines the number of pulses to measure.

Example: 

CALC:MARK:FUNC:MSUM 50US,450US,576.9US,8

Evaluates data that contains 8 pulses during a measurement
time of 450

 

µs and a pulse period of 576.9

 

µs. The evaluation

starts with an offset of 50

 

µs.

[SENSe:]MPOWer:FTYPe 

<FilterType>

This command selects the filter type for pulse power measurements.

Parameters:

<FilterType>

CFILter
NORMal

[SENSe:]MPOWer:RESult[:LIST]?

This command queries the results of the pulse power measurement.

This command may be used to obtain measurement results in an asynchronous way,
using the service request mechanism for synchronization to the end of the measure-
ment.

If there are no results, the command returns an error.

Return values: 

<PulsePower>

List of pulse powers.
The number of values depends on the number of pulses you
have been measuring.
The unit is dBm.

Usage: 

Query only

[SENSe:]MPOWer[:SEQuence] 

<Frequency>, <RBW>, <MeasTime>,

<TriggerSource>, <TriggerLevel>, <TriggerOffset>, <Detector>, <NoPulses>

This command configures and initiates the pulse power measurement.

Configuring and Performing Measurements

Содержание 1304.0004.03





















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды