Remote Commands
R&S
®
FPL1000
838
User Manual 1178.3370.02 ─ 03
<RemoteErrors>
<Error_no> | <Description> | <Command> | <Date> | <Time>
Comma-separated list of errors from the "Remote Errors" table,
where:
<Error_no>
: device-specific error code
<Description>
: brief description of the error
<Command>
: remote command causing the error
<Date>|<Time>
: date and time the error occurred
Example:
SYST:ERR:LIST?
Usage:
Query only
SYSTem:ERRor[:NEXT]?
This command queries the most recent error queue entry and deletes it.
Positive error numbers indicate device-specific errors, negative error numbers are error
messages defined by SCPI. If the error queue is empty, the error number 0, "No error",
is returned.
For details on error queues see
Chapter 6.4.1.7, "Status Reporting System"
Usage:
Query only
SYSTem:FIRMware:UPDate
This command starts a firmware update using the *.msi files in the selected directory.
The default path is
D:\FW_UPDATE
command. To store the update files the
command is used.
Only user accounts with administrator rights can perform a firmware update.
Example:
SYST:FIRM:UPD 'D:\FW_UPDATE'
Starts the firmware update from directory "
D:\FW_UPDATE
".
Usage:
Event
SYSTem:FORMat:IDENt
<IDNFormat>
This command selects the response format to the
Parameters:
<IDNFormat>
LEGacy
Format is compatible to R&S FSP/FSU/FSQ/FSG family.
NEW | FSL
R&S
FPL1000 format
Format is also compatible to the R&S FSL and R&S FSV family
*RST:
not reset!
Configuring the R&S
FPL1000
