Getting Started
R&S
®
FPL1000
38
User Manual 1178.3370.02 ─ 03
Function key
Assigned functions
RUN SINGLE
Starts and stops a single new measurement (Single Sweep Mode)
RUN CONT
Starts and stops a continuous measurement (Continuous Sweep Mode)
4.2.1.6
Keypad
The keypad is used to enter numeric parameters, including the corresponding units. It
contains the following keys:
Table 4-3: Keys on the keypad
Type of key
Description
Decimal point
Inserts a decimal point "." at the cursor position.
Sign key
Changes the sign of a numeric parameter. In the case of an alphanu-
meric parameter, inserts a "-" at the cursor position.
Unit keys
(GHz/-dBm MHz/dBm, kHz/dB,
Hz/dB etc.)
Adds the selected unit to the entered numeric value and complete the
entry.
In the case of level entries (e.g. in dB) or dimensionless values, all units
have the value "1" as multiplying factor. Thus, they have the same func-
tion as an ENTER key.
ESC
Closes all kinds of dialog boxes, if the edit mode is not active. Quits the
edit mode, if the edit mode is active. In dialog boxes that contain a "Can-
cel" button it activates that button.
For "Edit" dialog boxes the following mechanism is used:
●
If data entry has been started, it retains the original value and
closes the dialog box.
●
If data entry has not been started or has been completed, it closes
the dialog box.
(BACKSPACE)
If an alphanumeric entry has already been started, this key deletes the
character to the left of the cursor.
ENTER
●
Concludes the entry of dimensionless entries. The new value is
accepted.
●
With other entries, this key can be used instead of the "Hz/dB" unit
key.
●
In a dialog box, selects the default or focused element.
4.2.1.7
Navigation Controls
The navigation controls include a rotary knob and navigation keys. They allow you to
navigate within the display or within dialog boxes.
Instrument Tour
