Common Instrument Functions
R&S
®
FPL1000
134
User Manual 1178.3370.02 ─ 03
To select a color set
1. Press the SETUP key and select the "Display" softkey.
2. Select the "Theme + Color" tab.
3. In the "Screen Colors" area, do one of the following:
● Select a predefined set of colors for screen display.
● Select "User Defined Colors" to configure the color set yourself.
4. In the "Print Colors" area, do one of the following:
● Select a predefined set of colors for printing screenshots.
● Select "User Defined Colors" to configure the color set yourself.
5. Activate the "Show Print Colors on Display" option to see a preview of the print col-
ors.
To configure a user-defined color set
1. In the "Theme + Color" tab of the "Display" dialog box, select "User Defined Colors"
either for the screen or the print colors.
2. Select "Modify User Defined Colors" .
The "Screen Color Setup" dialog box is opened.
3. From the "Selected Object:" list, select the object to which you want to assign a
color.
4. Do one of the following:
● Select a color from the "Predefined Colors" .
● Select the "Userdefined Colors ..." button to define a different color.
The "Preview" area indicates the currently selected color.
5. To assign a user-specific color to the selected object, do one of the following:
● Select the color from the palette.
● Enter values for the "Tint:" , "Saturation:" , and "Brightness:" .
Note:
In the continuous color spectrum ( "Tint:" ), 0
% represents red and
100
% represents blue.
● Enter an "ARGB:" value in hexadecimal format.
6. Select the next object to which you want to assign a color from the "Selected
Object:" list.
7. Repeat these steps until you have assigned a color to all objects you want to con-
figure.
8. Select "OK" to close the dialog box.
The colors are applied to the assigned objects.
General Instrument Setup
