Rohde & Schwarz FPL1000 Series, Руководство пользователя

Страница: 32 / 899

Getting Started
R&S
®
FPL1000
32 User Manual 1178.3370.02 ─ 03
<Type><variant>-<serial_number>
The serial number can be found on the rear panel of the instrument. It is the third part
of the device ID printed on the bar code sticker:
For example, FPL1003-123456
To change the computer name
1. Press the SETUP key and then the "N Remote" softkey.
The current "Computer Name" is displayed in the "Network" tab.
2. Enter the new computer name.
3. Close the dialog box.
4.1.5.4 Changing the Windows Firewall Settings
A firewall protects an instrument by preventing unauthorized users from gaining access
to it through a network. Rohde & Schwarz highly recommends the use of the firewall on
your instrument. Rohde & Schwarz instruments are shipped with the Windows firewall
enabled and preconfigured in such a way that all ports and connections for remote
control are enabled.
For more details on firewall configuration, see the following Rohde & Schwarz White
Paper:
●
1EF96: Malware Protection Windows 10
Note that changing firewall settings requires administrator rights.
4.1.6 Configuring the Initial Instrument Settings
This section describes how to set up the R&S FPL1000 initially. For further basic
instrument settings, see the R&S FPL1000 User Manual.
● Setting the User Interface Language ...................................................................... 32
● Setting the Date and Time ...................................................................................... 33
4.1.6.1 Setting the User Interface Language
The user interface to the R&S FPL1000 is available in several languages.
Changing the user interface language
1. Press the SETUP key.
Preparing for Use