Rohde & Schwarz FPL1000 Series, Руководство пользователя

Страница: 686 / 899

Remote Commands
R&S
®
FPL1000
686 User Manual 1178.3370.02 ─ 03
DISPlay[:WINDow<n>]:ZOOM[:STATe] <State>
This command turns the zoom on and off.
Suffix:
<n>
.
Window
Parameters:
<State> ON | OFF | 1 | 0
*RST:
0
Example: DISP:ZOOM ON
Activates the zoom mode.
Manual operation: See " Single Zoom " on page 509
See " Restore Original Display " on page 509
8.8.6.2 Using the Multiple Zoom
DISPlay[:WINDow<n>]:ZOOM:MULTiple<zoom>:AREA
.....................................................686
DISPlay[:WINDow<n>]:ZOOM:MULTiple<zoom>[:STATe]
..................................................687
DISPlay[:WINDow<n>]:ZOOM:MULTiple<zoom>:AREA <x1>,<y1>,<x2>,<y2>
This command defines the zoom area for a multiple zoom.
To define a zoom area, you first have to turn the zoom on.
1 = origin of coordinate system (x1 = 0, y1 = 0)
2 = end point of system (x2 = 100, y2= 100)
3 = zoom area (e.g. x1 = 60, y1 = 30, x2 = 80, y2 = 75)
Suffix:
<n>
.
Window
<zoom> 1...4
Selects the zoom window.
Parameters:
<x1>,<y1>,
<x2>,<y2> Diagram coordinates in % of the complete diagram that define
the zoom area.
The lower left corner is the origin of coordinate system. The
upper right corner is the end point of the system.
Range:
0 to 100
Default unit: PCT
Setting Basic Spectrum RF Measurement Parameters