manualshive.com logo in svg

Rohde & Schwarz FPL1000 Series, Руководство пользователя

Поделиться
Скачать
Rohde & Schwarz FPL1000 Series Скачать руководство пользователя страница 801

Remote Commands

R&S

®

FPL1000

801

User Manual 1178.3370.02 ─ 03

Parameters:

<ContType>

WINDows | HCOPy

WINDows

Includes only the selected windows in the printout. All currently
active windows for the current channel setup (or "MultiView") are
available for selection. How many windows are printed on a
each page of the printout is defined by 

HCOPy:PAGE:

WINDow<device>:COUNt

 

on page 808.

This option is not available when copying to the clipboard
(

HCOP:DEST 'SYST:COMM:CLIP'

 or an image file (see 

HCOPy:

DEVice:LANGuage<device>

 

on page 803).

If the destination is currently set to an image file or the clipboard,
it is automatically changed to be a PDF file.

HCOPy

Selects all measurement results displayed on the screen for the
current channel setup (or "MultiView"): diagrams, traces, mark-
ers, marker lists, limit lines, etc., including the channel setup bar
and status bar, for printout on a single page. Displayed items
belonging to the software user interface (e.g. softkeys) are not
included. The size and position of the elements in the printout is
identical to the screen display.
*RST: 

HCOPy

Example: 

HCOP:DEST1 'SYST:COMM:CLIP'
HCOP:CONT WIND
HCOP:DEST1?
//Result: 'MMEM'
HCOP:DEV:LANG1?
//Result: 'PDF'

"Print to clipboard" is automatically switched to "print to PDF file"
when the contents are switched to "multiple windows".

Manual operation: 

See 

" Print Screenshot "

 

on page 113

See 

" Print Multiple Windows "

 

on page 113

HCOPy:CMAP<item>:DEFault<colors> 

This command defines the color scheme for print jobs.

Suffix: 

<item>

.

Selects the item for which the color scheme is to be defined.
For more information see 

Chapter 8.10.4.3, "CMAP Suffix

Assignment"

, 

on page 829.

Managing Settings and Results

Содержание FPL1000 Series




































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды