![Rohde & Schwarz FPL1000 Series Скачать руководство пользователя страница 645](http://html.mh-extra.com/html/rohde-and-schwarz/fpl1000-series/fpl1000-series_user-manual_1477826645.webp)
Remote Commands
R&S
®
FPL1000
645
User Manual 1178.3370.02 ─ 03
Manual operation:
See
See
See
See
[SENSe:]FREQuency:SPAN:FULL
This command restores the full span.
Usage:
Event
Manual operation:
See
[SENSe:]FREQuency:STARt
<Frequency>
This command defines a start frequency for measurements in the frequency domain.
Parameters:
<Frequency>
0 to (fmax - min span)
*RST:
0
Example:
FREQ:STAR 20MHz
Manual operation:
See
See
[SENSe:]FREQuency:STOP
<Frequency>
This command defines a stop frequency for measurements in the frequency domain.
Parameters:
<Frequency>
min span to fmax
*RST:
fmax
Example:
FREQ:STOP 2000 MHz
Manual operation:
See
See
8.8.1.2
Adjusting Settings Automatically
The commands required to adjust settings automatically in a remote environment are
described here.
[SENSe:]ADJust:CONFigure[:LEVel]:DURation
.................................................................646
[SENSe:]ADJust:CONFigure[:LEVel]:DURation:MODE
...................................................... 646
[SENSe:]ADJust:CONFigure:HYSTeresis:LOWer
..............................................................647
[SENSe:]ADJust:CONFigure:HYSTeresis:UPPer
...............................................................647
[SENSe:]ADJust:CONFigure:TRIGger
..............................................................................647
..........................................................................................648
Setting Basic Spectrum RF Measurement Parameters