The Spectrum Application (RF Measurements)
R&S
®
FPL1000
240
User Manual 1178.3370.02 ─ 03
The RF signal can be distinguished from noise more clearly.
Figure 7-3: RF sine wave signal with low S/N ratio with a smaller video bandwidth
7. By reducing the resolution bandwidth by a factor of 10, the noise is reduced by
10
dB. Set the RBW to
100
kHz
.
The displayed noise is reduced by approximately 10
dB. The signal, therefore,
emerges from noise by about 10
dB. Compared to the previous setting, the video
bandwidth has remained the same, i.e. it has increased relative to the smaller reso-
lution bandwidth. The averaging effect of the video bandwidth is therefore reduced.
The trace will be noisier.
Figure 7-4: Reference signal at a smaller resolution bandwidth
Measurements and Results
