Rohde & Schwarz FPL1000 Series, Руководство пользователя

Страница: 232 / 899

The Spectrum Application (RF Measurements)
R&S
®
FPL1000
232 User Manual 1178.3370.02 ─ 03
7.2 Measurements and Results
Access : "Overview" > "Select Measurement"
Or : MEAS
In the Spectrum application, the R&S FPL1000 provides a variety of different measure-
ment functions.
●
Basic measurements - measure the spectrum of your signal or watch your signal
in time domain
●
Power measurements - calculate the powers involved in modulated carrier signals
●
Emission measurements - detect unwanted signal emission
●
Statistic measurements - evaluate the spectral distribution of the signal
●
Special measurements - provide characteristic values of the signal
The individual functions are described in detail in the following chapters.
The measurement function determines which settings, functions and evaluation meth-
ods are available in the R&S
FPL1000. The various measurement functions are descri-
bed in detail here.
When you select a measurement function, the measurement is started with its default
settings immediately and the corresponding measurement configuration menu is dis-
played. The measurement configuration menu can be displayed at any time by press-
ing the MEAS CONFIG key.
The easiest way to configure measurements is using the configuration "Overview" ,
see
Chapter 7.1, "Configuration Overview" , on page 230.
In addition to the measurement-specific parameters, the general parameters can be
configured as usual, see
Chapter 7, "The Spectrum Application (RF Measurements)" ,
on page 230. Many measurement functions provide special result displays or evalua-
tion methods; however, in most cases the general evaluation methods are also availa-
ble, see
Chapter 7.2.2, "Basic Evaluation Methods" , on page 253.
In addition to the measurement-specific parameters, the general parameters can be
configured as usual, see
Chapter 7.1, "Configuration Overview" , on page 230. Many
measurement functions provide special result displays or evaluation methods; how-
ever, in most cases the general evaluation methods are also available, see
Chap-
ter 7.2.2, "Basic Evaluation Methods" , on page 253.
The remote commands required to retrieve measurement results are described in
Chapter 8.8.7.4, "Retrieving Trace Results" , on page 702.
● Basic Measurements .............................................................................................233
● Basic Evaluation Methods .....................................................................................253
● Channel Power and Adjacent-Channel Power (ACLR) Measurement ..................255
● Carrier-to-Noise Measurements ............................................................................277
● Occupied Bandwidth Measurement (OBW) .......................................................... 281
● Spectrum Emission Mask (SEM) Measurement ................................................... 287
● Spurious Emissions Measurement ........................................................................327
● Time Domain Power Measurement .......................................................................340
Measurements and Results