Common Instrument Functions
R&S
®
FPL1000
123
User Manual 1178.3370.02 ─ 03
6.2.4.3
Example for Storing Multiple Measurement Results to a PDF File
The following example describes the procedure to store results from measurements in
the Spectrum application and the I/Q Analyzer to a single PDF file.
1. Configure and perform the measurements in the Spectrum application and I/Q
Analyzer as required. Configure at least the following result displays:
● Frequency Sweep, Spectrogram (Spectrum)
● Magnitude, Spectrum (I/Q Analyzer)
2. Switch to the "MultiView" tab to display an overview of the result displays in all
active channel setups.
3. Select the "Printer" tool in the toolbar.
The "Print Settings" dialog box is displayed.
4. In the "Content" tab, select "Print Selected Windows" .
5. Select the result displays listed in
6. Enter the comment
Measurement Test Report
to be inserted at the top of each
page.
7. Select "Print Page Count" and "Print Date and Time" .
8. In the "Content" tab, select "Print Selected Windows" .
9. In the "Printer" tab, select "File" as the "Destination" .
10. Select "PDF" from the file format selection list.
11. Select "Suppress File Name Dialog" .
12. In the "Page Setup" tab, select "Landscape" as the "Orientation" .
Data Management
