Trigger
R&S
®
RTA4000
99
User Manual 1335.7898.02 ─ 08
Actions on Trigger
Activates the selected actions on trigger event.
Remote command:
Configuration
Opens a menu to select the actions that are initiated on trigger event.
Pulse
Generates a pulse on the Aux
Out connector on trigger event. The acquisition is not
delayed, the pulse generation runs asynchronously.
Enabling "Pulse" sets the "Setup" > "Aux Out" selection to "Trigger Out", and vice
versa. Selecting another item in the "Aux Out" menu disables the pulse action.
Using remote commands, you can set the pulse width and polarity of the trigger out
pulse.
Remote command:
TRIGger:OUT:MODE TRIGger
)
Sound
Generates a beep on trigger event. The acquisition is not delayed, the sound genera-
tion runs asynchronously. The minimum time between two beeps is 1
s. If the instru-
ment triggers faster, not all events are notified by a beep.
Remote command:
Screenshot
Saves a screenshot on each trigger event. The screenshot is saved when the acquisi-
tion is complete. During saving, the acquisition stops, and restarts when saving is fin-
ished. Thus, the waveform update rate decreases significantly.
Set up the target directory, color, file name and file format in "File" menu > "Screen-
shots" before you start acquisition.
If fast segmentation is active, only the last acquisition is saved.
Remote command:
TRIGger:EVENt:SCRSave:DESTination
Save Wavef.
Saves the data of a selected waveform on each trigger event. The waveform is saved
when the acquisition is complete. During saving, the acquisition stops, and restarts
when saving is finished. Thus, the waveform update rate decreases significantly.
Before you start acquisition, select the waveform and set up the target directory, file
name and file format in "File" menu > "Waveforms".
If fast segmentation is active, only the last acquisition is saved.
Actions on trigger
