manualshive.com logo in svg

R&S RTA4000, Руководство пользователя

Поделиться
Скачать
R&S RTA4000 Скачать руководство пользователя страница 257

Serial bus analysis

R&S

®

RTA4000

257

User Manual 1335.7898.02 ─ 08

Label

Displays or hides the bus label. The bus label is shown on the right side of the display
at the bus signal, and in the bus table. The bus and its label are only visible, if
"Decode" is enabled.

You can enter a label text in several ways:

●

Select a string from the library list with "Predefined Label".

●

Enter a user-defined text using "Edit Label".

Remote command: 

BUS<b>:LABel:STATe

 

on page 605

Predefined Label

Selects a predefined label text. You can edit the text with "Edit Label".

Edit Label

Opens on-screen keypad to enter a label text. If you previously have selected a prede-
fined label, it is already written in the entry line, and you can modify it.

The maximum name length is 8 characters, and only ASCII characters provided on the
on-screen keypad can be used.

Remote command: 

BUS<b>:LABel

 

on page 605

13.1.5

 

Label list

For all protocols using ID or address identification, it is possible to create label lists
containing addresses or IDs, a symbolic name for each node (symbolic label), and
some protocol-specific information.

You can also use the label list to trigger on an identifier or address. Instead of entering
the value, you select the name, which is defined in the label list.

The format of label list files is PTT.

Label lists are protocol-specific. They are described in the corresponding protocol
chapters:

●

Chapter 13.5.6, "CAN label list"

, 

on page 296

●

Chapter 13.6.6, "LIN label list"

, 

on page 309

Basics of protocol analysis

Содержание RTA4000






























































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды