manualshive.com logo in svg

R&S RTA4000, Руководство пользователя

Поделиться
Скачать
R&S RTA4000 Скачать руководство пользователя страница 121

Waveform analysis

R&S

®

RTA4000

121

User Manual 1335.7898.02 ─ 08

Label

Opens a menu to specify user-defined text labels for the individual reference wave-
forms.

Bit ← Label

Selects the reference waveform for labeling.

Label ← Label

Enables or disables the user-defined label for the selected reference waveform.

Predefined Label ← Label

Selects a predefined label text. You can edit the text with "Edit Label".

Edit Label ← Label

Opens on-screen keypad to enter a label text. If you previously have selected a prede-
fined label, it is already written in the entry line, and you can modify it.

The maximum name length is 8 characters, and only ASCII characters provided on the
on-screen keypad can be used.

Remote command: 

REFCurve<m>:LABel

 

on page 487

7.4

 

History and segmented memory

Using the history and segmented memory, you can access the data of previously
acquired waveforms and analyze them. For example, you can analyze signals that
occur in short bursts with long idle times, packet communication on serial buses, radar
pulses, and laser pulses. The segmented memory is used to store the waveforms and
provides a segment table to analyze the stored waveforms.

You can analyze history segments in the same way as the waveform of the latest
acquisition. All R&S

 

RTA4000 measurement and analysis tools are available: zoom,

cursor measurements, quick and automatic measurements, mask test, serial protocol
analysis, mixed-signal functions and so on.

The segment table and the waveform data of history segments can be saved to file.

The fast segmentation mode reduces the blind time of the acquisition.

7.4.1

 

Segmented memory

If an acquisition runs, the instrument stores the captured data in the memory, pro-
cesses the data and displays the waveform. The segmented memory keeps the data of
the displayed waveform and also the data of the waveforms that have been captured
before. Each stored waveform is called a segment. The record length of the segments
can be defined. The number of segments depends on the record length. The shorter
the record length, the more segments can be saved.

History and segmented memory

Содержание RTA4000






























































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды