manualshive.com logo in svg

R&S RTA4000, Руководство пользователя

Поделиться
Скачать
R&S RTA4000 Скачать руководство пользователя страница 216

Documenting results

R&S

®

RTA4000

216

User Manual 1335.7898.02 ─ 08

external storage location (USB_FRONT). This location is only available if the USB
flash drive is connected. Using a USB hub is not supported.

Reference waveforms and instrument settings, which are intended for further use on
the instrument, are usually saved to the internal storage (/INT). You can also store
them to the external storage, or move them to the other location using the export and
import function.

The supported file system in all storage locations is FAT.

10.1

 

Saving and loading instrument settings

To repeat measurements or tests at different times or perform similar measurements
with different test data, you can save the used configuration settings. Furthermore, it
can be helpful to refer to the configuration settings of a particular measurement when
analyzing the results. Therefore, you can easily save the complete measurement con-
figuration including the display settings. The settings are saved together with a small
screenshot of the display for better identification of the setup files.

By default, instrument settings are saved to the internal storage /INT/SETTINGS, but
you can also save them to USB flash drive.

If you often save and load instrument settings, try the following shortcuts:

●

The "Save Setup" toolbar icon saves the current settings to a file according to the
settings in "File" menu > "Setup". The "Load Setup" toolbar icon opens a dialog to
select and load a setup. See also 

"Configuring the Toolbar"

 

on page 42.

●

Configure OneTouch to save instrument settings. See 

Chapter 10.5, "Quick save

with onetouch"

, 

on page 224.

To save, load, reset, export and import instrument settings

1. Press the [Save Load] key.

2. Select "Setup"

3. Select the required function.

Saving and loading instrument settings

Содержание RTA4000






























































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды