manualshive.com logo in svg

R&S RTA4000, Руководство пользователя

Поделиться
Скачать
R&S RTA4000 Скачать руководство пользователя страница 238

General instrument setup

R&S

®

RTA4000

238

User Manual 1335.7898.02 ─ 08

Display Date & Time

Switches the date and time display in the upper right corner of the screen on or off.

Remote command: 

DISPlay:DTIMe

 

on page 592

11.7

 

Options

All options (except for R&S

 

RTA-B1) are activated by license keys. No additional instal-

lation or hardware change is required.

Unregistered licenses

Unregistered licenses are not assigned to a particular instrument. The instrument
accepts only registered licenses. If your license is delivered unregistered, use the
online tool R&S License Manager to register the license for your instrument. The regis-
tration of a permanent license is irreversible, so ensure that you register it for the cor-
rect instrument. The address of the tool is 

https://extranet.rohde-schwarz.com/service

.

The "Active Options" tab provides information on installed software options. Here you
can install new options or deactivate existing options using license keys.

The "Inactive Options" tab lists all deactivated and expired options.

The "Deactivated Options" tab shows all deactivated options with their deactivation
information and provides a function to export the deactivation response. The response
is required by the R&S License Manager.

11.7.1

 

Activating options

Consult your sales representative and provide the material number, serial number, and
the device ID of your instrument to get a license key. You find this information in
"Setup" menu > "Device Information".

The license key is provided in written form or in a file. Unregistered licenses must be
registered in the R&S License Manager before they can be activated on the instru-
ment.

1. If you received the option key in a file, save the file to a USB flash drive.

2. Connect the drive to the R&S

 

RTA4000.

3. Tap the "Menu" icon in the lower right corner of the screen.

4. Scroll down the menu. Tap "Setup".

5. Select "Options".

Options

Содержание RTA4000






























































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды