manualshive.com logo in svg

R&S RTA4000, Руководство пользователя

Поделиться
Скачать
R&S RTA4000 Скачать руководство пользователя страница 476

Remote control commands

R&S

®

RTA4000

476

User Manual 1335.7898.02 ─ 08

TRIGger:EVENt:REFSave 

<SaveReference>

If ON, the instrument saves reference waveforms of all active channels, and activates
the references. This action works only with single acquisition.

The channels are assigned to the references: C1 to R1, C2 to R2 and so on. If a chan-
nel is off, the assigned reference is also not active.

If "Nx

 

Single" > 1, the waveforms of the last acquisition are saved as reference wave-

forms.

Parameters:

<SaveReference>

ON | OFF
*RST: 

OFF

TRIGger:EVENt:SCRSave 

<SaveScreenshot>

If ON, the instrument saves a screenshot on each trigger event. The screenshot is
saved when the acquisition is complete. During saving, the acquisition stops, and
restarts when saving is finished. Thus, the waveform update rate decreases signifi-
cantly.

To set up the target directory, file name, color and file format, use the following com-
mands:

●

TRIGger:EVENt:SCRSave:DESTination

●

HCOPy:COLor:SCHeme

●

HCOPy:FORMat

Parameters:

<SaveScreenshot>

ON | OFF
*RST: 

OFF

TRIGger:EVENt:SCRSave:DESTination 

<File>

Defines the target directory and file name for a screenshot that is saved on trigger
event when 

TRIGger:EVENt:SCRSave

 is ON.

Parameters:

<File>

String parameter
String with path and file name

TRIGger:EVENt:TRIGgerout 

<PulseOut>

If ON, the instrument generates a pulse on the Aux

 

Out connector on trigger event.

The acquisition is not delayed, the pulse generation runs asynchronously.

Enabling "Pulse" sets the "Setup" > "Aux Out" selection to "Trigger Out", and vice
versa. Selecting another item in the "Aux Out" menu disables the pulse action.

Trigger

Содержание RTA4000






























































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды