manualshive.com logo in svg

R&S RTA4000, Руководство пользователя

Поделиться
Скачать
R&S RTA4000 Скачать руководство пользователя страница 24

Preface

R&S

®

RTA4000

24

User Manual 1335.7898.02 ─ 08

2

 

Preface

2.1

 

Documentation overview

This section provides an overview of the R&S

 

RTA4000 user documentation.

2.1.1

 

Manuals and instrument help

You find the manuals on the product page at:

www.rohde-schwarz.com/manual/rta4000

Getting started manual

Introduces the R&S

 

RTA4000 and describes how to set up the product. A printed Eng-

lish version is included in the delivery.

User manual

Contains the description of all instrument modes and functions. It also provides an
introduction to remote control, a complete description of the remote control commands
with programming examples, and information on maintenance and instrument interfa-
ces. Includes the contents of the getting started manual.

The 

online version

 of the user manual provides the complete contents for immediate

display on the internet.

Instrument help

The help offers quick, context-sensitive access to the functional description directly on
the instrument.

Safety instructions

Provides safety information in many languages. The printed document is delivered with
the product.

Instrument security procedures manual

Deals with security issues when working with the R&S

 

RTA4000 in secure areas.

Service manual

Describes the performance test for checking the rated specifications, module replace-
ment and repair, firmware update, troubleshooting and fault elimination, and contains
mechanical drawings and spare part lists. The service manual is available for regis-
tered users on the global Rohde

 

&

 

Schwarz information system (GLORIS, 

https://

gloris.rohde-schwarz.com

).

Documentation overview

Содержание RTA4000






























































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды