![background image](http://html1.mh-extra.com/html/omron/cs1w-nc113-rev-02-2008/cs1w-nc113-rev-02-2008_manual_742370122.webp)
5-3
Section
Reading Data with the READ DATA Bit
110
Operating Data Area
Name
Model
Operating
data area
Bit
Contents
Number of read
words
Same for
all models
I+4
00 to 15
15
00
Specifies the number of words
to be read to the CPU Unit.
Setting range: 0001 to 0304
Hex (1 to 772 words)
Read source
address
I+5
00 to 15
15
00
Specifies the beginning
address of the area in the
PCU from which parameters
and data are read.
For details of the PCU’s inter-
nal addresses, refer to
Sec-
tion 4 Data Settings
.
Read destination
area
I+6
00 to 15
EM bank
designation
DM/EM
designation
15
08 07
00
Specifies the area where the
parameters and data read
from the PCU are stored.
DM/EM designation:
0D: Designates DM Area
0E: Designates EM Area
EM bank designation:
Specifies the EM Area
bank number if the EM
Area is designated in bits
00 to 07.
Setting range: 00 to 0C
(banks 0 to C)
Read destination
word
I+7
00 to 15
15
00
Specifies the beginning word
of the area in the CPU Unit’s
DM or EM Area in which
parameters and data are
stored.
Setting range: 0000 to 7FFF
Hex (Words 0 to 32767)
5-3-3 Timing Chart for Reading Data
Reading data is possible even during axis operation.
It is not possible to write and read data at the same time.
The following diagram is a timing chart for reading data from a 4-axis PCU.
Number of read words (l+4)
Read source address (l+5)
Read destination area (l+6)
Read destination word (l+7)
READ DATA (n+1, 13)
Data Transferring Flag
(n+8, 14)
(9 words)
64 Hex (100)
After the data reading operation has been completed, the Data Transferring Flag
(word n+8, bit 14) is turned from ON to OFF. If an error occurs during data trans-
fer, the Error Flag (word n+8, bit 12) will be turned ON and the error code will be
output to n+10 in the operating memory area. Check this error code to determine
the cause of the error and correct it.
Содержание CS1W-NC113 - REV 02-2008
Страница 1: ...CS1W NC113 213 413 133 233 433 Position Control Units ...
Страница 2: ...iv ...
Страница 4: ...vi ...