Omron CP1L-EL20DR-D, Руководство по эксплуатации

Страница: 833 / 856

799
PLC Setup Appendix G
Operation Adjustment Settings
8 Error counter cycle 0: 3 (4-ms incre-
ments) 0: 3 (4-ms incre-
ments) When power is turned
ON 417 00 to 07 00 hex
1 (4-ms incre-
ments) 01 hex
: :
255 (4-ms incre-
ments) FF hex
9 Power Supply Freq. for
One Motor Revolution
per Sec. 0 (0.1-Hz incre-
ments) 0 (0.1-Hz incre-
ments) When power is turned
ON 436 00 to 15 0000 hex
: :
65,535 Hz (0.1-Hz
increments) FFFF hex
10 Number of Encoder
Pulses for One Motor
Revolution 0 0 When power is turned
ON 437 00 to 15 0000 hex
: :
65,535 FFFF hex
Name Default Settings When setting is read
by CPU Unit
Internal
address
Bits Settings
1 Limit output during
acceleration and con-
stant speed Do not use Use When power is turned
ON 432 00 to 03 0 hex
Do not use 1 hex
2 Limit output during
deceleration and when
stopped Do not use Use When power is turned
ON 432 04 to 07 0 hex
Do not use 1 hex
3 Output coefficient dur-
ing acceleration and
constant speed 0: 6 (0.01 incre-
ments) 0: 6 (0.01 incre-
ments) When power is turned
ON 433 00 to 07 0 hex
1 (0.01 increments) 1 hex
: :
255 (0.01 incre-
ments) FF hex
4 Output coefficient dur-
ing deceleration 0: 96 (0.01
increments) 0: 96 (0.01 incre-
ments) When power is turned
ON 434 00 to 07 0 hex
1 (0.01 increments) 1 hex
: :
255 (0.01 incre-
ments) FF hex
5 Output coefficient after
pulse output 0: 50 (0.01
increments) 0: 50 (0.01 incre-
ments) When power is turned
ON 435 00 to 07 0 hex
1 (0.01 increments) 1 hex
: :
255 (0.01 incre-
ments) FF hex
Name Default Settings When setting is read
by CPU Unit
Internal
address
Bits Settings