Omron CP1L-EL20DR-D, Руководство по эксплуатации

Страница: 759 / 856

725
Auxiliary Area Allocations by Address Appendix D
A526 00 Serial Port 2
Restart Bit
(CP1L EM-
type CPU
Units) Turn this bit ON to restart the serial
port 2 of a CP1L EM-type CPU Unit.
(Do not use this bit when the port is
operating in Peripheral Bus Mode.)
Note This bit is turned OFF auto-
matically when the restart
processing is completed.
OFF to ON:
Restart Retained Cleared --- ---
Serial Port 1
Restart Bit
(CP1L EL-
type CPU
Units) Turn this bit ON to restart the serial
port 1 of a CP1L EL-type CPU Unit.
(Do not use this bit when the port is
operating in Peripheral Bus Mode.)
Note This bit is turned OFF auto-
matically when the restart
processing is completed.
01 Serial Port 1
Restart Bit
(CP1L EM-
type CPU
Units) Turn this bit ON to restart the serial
port 1 of a CP1L EM-type CPU Unit.
Note This bit is turned OFF auto-
matically when the restart
processing is completed.
0 to ON:
Restart Retained Cleared --- ---
A527 00 to 07 Online Edit-
ing Disable
Bit Validator
The Online Editing Disable Bit
(A527.09) is valid only when this byte
contains 5A.
To disable online editing from the
CX-Programmer, set this byte to 5A
and turn ON A527.09.
(Online editing refers to changing or
adding to the program while the PLC
is operating in MONITOR mode.) 5A: A527.09
enabled
Other value:
A527.09 dis-
abled Retained Cleared --- A527.09
09 Online Edit-
ing Disable
Bit Turn this bit ON to disable online
editing. The setting of this bit is valid
only when A527.00 to A527.07 have
been set to 5A. ON: Disabled
OFF: Not dis-
abled Retained Cleared --- A527.00
to
A527.07
A528 00 to 07 Serial Port 2
Error Flags
(CP1L EM-
type CPU
Units)
These flags indicate what kind of
error has occurred at the serial port 2
of a CP1L EM-type CPU Unit; they
are automatically turned OFF when
the serial port 2 is restarted.
(These flags are not valid in periph-
eral bus mode and only bit 5 is valid
in NT Link mode.)
PLC Link Polling Unit:
Bit 05: ON for timeout error.
PLC Link Polled Unit:
Bit 03: ON for framing error.
Bit 04: ON for overrun error.
Bit 05: ON for timeout error.
These bits can be cleared by the CX-
Programmer. Bits 00 and 01:
Not used.
Bit 02: ON for
parity error.
Bit 03: ON for
framing error.
Bit 04: ON for
overrun error.
Bit 05: ON for
timeout error.
Bits 06 and 07:
Not used. Retained Cleared --- ---
Serial Port 1
Error Flags
(CP1L EL-
type CPU
Units) These flags indicate what kind of
error has occurred at the serial port 1
of a CP1L EL-type CPU Unit; they
are automatically turned OFF when
the serial port 1 is restarted.
(These flags are not valid in periph-
eral bus mode and only bit 5 is valid
in NT Link mode.)
PLC Link Polling Unit:
Bit 05: ON for timeout error.
PLC Link Polled Unit:
Bit 03: ON for framing error.
Bit 04: ON for overrun error.
Bit 05: ON for timeout error.
These bits can be cleared by the CX-
Programmer.
Addresses Name Function Settings Status
after
mode
change
Status at
startup
Write
timing
Related
Flags,
Settings
Word Bits