Omron CP1L-EL20DR-D, Руководство по эксплуатации

Страница: 744 / 856

710
Auxiliary Area Allocations by Address Appendix D
A310 All Manufactur-
ing Lot Num-
ber, Lower
Digits The manufacturing lot number is
stored in 6 digits hexadecimal. X, Y,
and Z in the lot number are con-
verted to 10, 11, and 12, respec-
tively.
Examples:
Lot number 01805
A310 = 0801, A311 = 0005
Lot number 30Y05
A310 =1130, A311 = 0005 --- Retained Retained When the
power sup-
ply is
turned ON
---
A311 All Manufactur-
ing Lot Num-
ber, Upper
Digits
A313 All Error Informa-
tion When a non-fatal error (Built-in
Ethernet error) occurs, the 4-digit
hexadecimal error information is writ-
ten to this word. When two or more
errors occur simultaneously, the
information of the highesterror code
will be recorded. --- Cleared Cleared Refreshed
when error
occurs. A315.10
A315.11
A315 10 Built-in Ether-
net Error Flag ON when a Built-in Ethernet error
has occurred in memory. --- Cleared Cleared Refreshed
when error
occurs. A402.00,
A313
11 Logic Errors in
Setting Table
Flag ON when an error occurs in routing
table, IP address table, or IP router
table. --- Cleared Cleared Refreshed
when error
occurs. A402.00,
A313
13 Option Board
Error Flag ON when the Option Board is
removed while the power is being
supplied. CPU Unit operation will
continue and the ERR/ALM indicator
will flash.
OFF when the error has been
cleared. --- Cleared Cleared Refreshed
when error
occurs. A402.00,
A424
15 Flash Mem-
ory Error Flag ON when writing to the internal flash
memory fails. CPU Unit operation
will continue and the ERR/ALM indi-
cator will flash.
OFF when the error has been
cleared. --- Cleared Cleared Refreshed
when error
occurs. A402.00
A316
to
A317 All High-speed
Counter 2 PV Contains the PV of high-speed
counter 2. A317 contains the left-
most 4 digits and A316 contains the
rightmost 4 digits.
The PV is cleared when operation
starts. --- --- Cleared Refreshed
each cycle
during
oversee
process.
Refreshed
when
PRV(881)
instruction
is exe-
cuted. ---
A318
to
A319 All High-speed
Counter 3 PV Contains the PV of high-speed
counter 3. A319 contains the left-
most 4 digits and A318 contains the
rightmost 4 digits.
The PV is cleared when operation
starts. --- --- Cleared ---
A320 00 High-speed
Counter 2
Range 1 Com-
parison Condi-
tion Met Flag These flags indicate whether the PV
is within the specified ranges when
high-speed counter 2 is being oper-
ated in range-comparison mode.
Cleared at beginning of operation.
Cleared when range comparison
table is registered.
OFF: PV not in range
ON: PV in range --- --- Cleared Refreshed
each cycle
during
oversee
process.
Refreshed
when
PRV(881)
instruction
is exe-
cuted. ---
Address Name Function Settings Status
after
mode
change
Status
at star-
tup
Write
timing
Related
flags, set-
tings
Words Bits