Omron CP1L-EL20DR-D, Руководство по эксплуатации

Страница: 75 / 856

41
Specifications Section 2-2
Note (1) The response time is the hardware delay value. The delay set in the PLC
Setup (0 to 32 ms, default: 8 ms) must be added to this value. For the
CP1W-40EDR/EDT/EDT1, a fixed value of 16 ms must be added.
(2) Do not apply voltage in excess of the rated voltage to the input terminal.
Output Specifications
Relay Outputs (CP1W-40EDR/32ER/20EDR1/16ER/8ER)
Note (1) Under the worst conditions, the service life of output contacts is as shown
above. The service life of relays is as shown in the following diagram as
a guideline.
OFF delay 1 ms max. (See note 1.)
Circuit configuration
Item Specification
IN
IN
COM
4.7 k
Ω
750
Ω
Input LED
Internal
circuits
Item Specification
Max. switching capacity 2 A, 250 VAC (cos
φ
= 1),
2 A, 24 VDC (4 A/common)
Min. switching capacity 5 VDC, 10 mA
Service life
of relay
(See note.) Electrical Resistive
load 150,000 operations (24 VDC)
Inductive
load 100,000 operations (240 VAC, cos
φ
= 0.4)
Mechanical 20,000,000 operations
ON delay 15 ms max.
OFF delay 15 ms max.
Circuit configuration
COM
OUT
OUT
Output LED
Internal
circuits
Maximum
250 VAC: 2 A
24 VDC: 2 A
300
200
100
50
30
20
5
3
2
10
0.1 0.2 0.3 0.5 0.7 1 2 3 5
Lif
e (
×
10
4
)
Contact current (A)
120 VAC resistive load
24 VDC
τ
= 7 ms
120 VAC cos
φ
= 0.4
240 VAC cos
φ
= 0.4
24 VDC/240 VAC resistive load
Switching rate: 1,800 operations/hour