Mitsubishi Electric NZ2GF2B-60TCRT4, Руководство пользователя

Страница: 115 / 388

113
CHAPTER 7 VARIOUS SETTINGS
7
7.
1 Par
a
met
e
r
S
e
ttings
11.
Click the [Execute] button and the following window is displayed.
12.
Click the [Yes] button.
13.
The station-based parameter is written to the temperature control module.
14.
To set the parameters of different control modes, select the mode when setting "Method
selection", repeat operations of 4 to 9 to reflect "Read Value" to "Write Value". After that, correct
the parameter items if necessary, and write the parameter to the temperature control module.
(b) Setting items of when "Param write (Standard control)" is set
Setting item Reference
CH

Basic setting
CH  Input range Page 312, Appendix 3 (5)
CH  Target value_SV_setting
*1
Page 317, Appendix 3 (6)
CH

PID Constant setting
CH  Proportion belt_P_setting_CH  Heating proportion belt Page 318, Appendix 3 (7)
CH

Integration time_I_setting Page 320, Appendix 3 (8)
CH  Differentiation time_D_setting Page 320, Appendix 3 (9)
CH  Limiter setting
CH  Upper limit output limiter
Page 321, Appendix 3 (10)
CH  Lower limit output limiter
CH

Output change amount limiter Page 323, Appendix 3 (11)
CH  Setting change rate limiter or CH  Setting change rate
limiter_temperature rise
Page 324, Appendix 3 (12)
CH  Setting change rate limiter unit time setting Page 325, Appendix 3 (13)
CH  Upper limit setting limiter
*1
Page 325, Appendix 3 (14)
CH  Lower limit setting limiter
*1
CH  Control output cycle setting_CH  Heating control output cycle setting Page 326, Appendix 3 (15)
CH

Primary delay digital filter setting Page 328, Appendix 3 (16)
CH  Moving averaging count setting Page 329, Appendix 3 (17)
CH  Control response parameter Page 329, Appendix 3 (18)
CH  Differentiation operation selection Page 330, Appendix 3 (19)
CH

Adjustment sensitivity_non-inductive belt_setting Page 331, Appendix 3 (20)
CH  Forward action_Reverse action setting Page 334, Appendix 3 (24)
CH  Loop disconnection detection
CH  Loop disconnection detection judgment time Page 334, Appendix 3 (25)
CH  Loop disconnection detection dead band Page 335, Appendix 3 (26)
CH

Stop mode setting Page 336, Appendix 3 (27)
CH  Automatic backup setting after auto tuning of PID constants Page 337, Appendix 3 (28)
CH  Setting change rate limiter_temperature drop Page 324, Appendix 3 (12)