Mitsubishi Electric NZ2GF2B-60TCRT4, Руководство пользователя

Страница: 114 / 388

112
Set all the items for the parameter. If any blank exists, the parameter cannot be written to the temperature control module.
10.
Double-click the item to change, and set a new value.
• Items to be set from the pull-down list
Double-click the item to display the pull-down list, and select the value from the list.
• Items to be entered in the text box
Double-click the item and enter a value.
●
When "Control mode switching" is changed and the parameter write is performed, remote buffer memory areas (address
of 100H or later) are overwritten with default values.
● When "Control output cycle unit switching setting" is changed and the parameter write is performed, the following
parameters are overwritten with default values.
• "Control output cycle setting"
• "Heating control output cycle setting"
• "Cooling control output cycle setting"
●
When "Sampling cycle selection" is changed and the parameter write is performed, remote buffer memory areas
(address of 100H or later) are overwritten with default values.
Setting item Reference
Function extension and sampling cycle
selection
Auto-setting at input range change Page 309, Appendix 3 (1) (a)
Setting change rate limiter setting Page 310, Appendix 3 (1) (b)
Control output cycle unit switching setting Page 310, Appendix 3 (1) (c)
Moving averaging process setting Page 310, Appendix 3 (1) (d)
Sampling cycle selection Page 310, Appendix 3 (1) (e)
Cyclic data update watch time setting Page 311, Appendix 3 (2)
Control mode switching Page 311, Appendix 3 (3)
HOLD_CLEAR setting CH

_HOLD_CLEAR setting Page 312, Appendix 3 (4)
Select an item from the pull-down list.
Enter a value in the text box.
The checkbox cannot be unchecked.
The list cannot be collapsed.