Mindray VS8, Руководство по обслуживанию

Страница: 152 / 156

A-12 VS 9/VS 8 Vital Signs Monitor Service Manual
ty us Certificat
e Certifica
te Certif
icate Passwor
d
PEAP-MSCHAPV2 Y O Y Y N N N
PEAP-GTC Y O Y Y N N N
PEAP-TLS Y O Y Y Y N N
TTLS Y O Y Y N N N
TLS Y N Y Y Y N N
FAST Y O Y N N Y Y
LEAP Y N Y N N N N
Note: Y means "Yes", N means "No," and "O" means "Optional".
The configuration items are described as follows:

Phase2 Auth: When PEAP is selected in the EAP method, users can configure the
following PEAP internal methods: EAP-MSCHAPV2, EAP-GTC and EAP-TLS.

Identity: user identity, which is the user name in AD, LDAP or local user
management on the RADIUS server.

Anonymous: This item does not affect the authentication process. It is used to
hide the real name (identity).

Password: password of the identity.

CA Certificate: Select the CA certificate from the imported certificates.
 User Certificate: Select the user certificate from the imported certificates.
 PAC Certificate: Select the PAC certificate from the imported certificates when
EAP-FAST is selected. If the RADIUS server supports PAC preparation in the band
and PAC is prepared for the customer, it is not required to set the PAC certificate
and password.

PAC password: Enter the PAC password for the PAC certificate when EAP-FAST is
selected. If the RADIUS server supports PAC preparation in the band and PAC is
prepared for the customer, it is not required to set the PAC certificate and
password.
A.8
Troubleshooting
Symptom Possible Cause Recommended Measures
The monitor
cannot be
connected to the
AP, and the Wi-Fi
signal icon on the
monitor displays
X.
The nearby AP is not
turned on.
Ensure that the AP has been turned on
and belongs to the VLAN where the
monitor is.
The monitor is not
turned on in the AP
coverage area.
Move the monitor to the AP coverage
area and then turn it on. Make sure that
the RSSI value displayed on the monitor
is greater than
–
65 dBm.
Ensure that co-channel interference