Mindray VS8, Руководство по обслуживанию

Страница: 150 / 156

A-10 VS 9/VS 8 Vital Signs Monitor Service Manual
Device Model
2500 wireless controller AIR-CT2504-x-K9
2600 wireless access point AIR-CAP2602I-x-K9
A.7
Setting Wireless Parameters of Monitor
Configure the WLAN parameters of the monitor according to the table below:
Parameter Recommended
Setting Description
[
Main Menu
]
→
[
Maintenance
]
→
[
User Maintenance
]
→
[
Network Setup
]
→
[
WLAN
]
SSID Enter the actual
network name
/
Security mode WPA2-PSK It should be the same as the safe mode of the
WLAN deployed for the monitor. If EAP is
used, select the security mode according to
the WLAN deployment.
Password Enter the actual
network
password
/
[ Main Menu ]
→
[ Maintenance ]
→
[ User Maintenance ]
→
[ Network Setup ]
→
[ WLAN ]
→
[
WLAN Setup
]
WLAN band 5G Options: 2.4G, 5G, Auto
2.4G = Only the 2.4 GHz band is used.
5G = Only the 5GHz band is used.
Auto = The 2.4 GHz and 5 GHz bands (5 GHz
first) are used.
Authentication
server type ACS Options: ACS and SBR
ACS refers to the CISCO access control server.
SBR refers to the server different from ACS.
This is applicable only when the security type
is Enterprise.
BG Channel Specified Options: all, specified, none
You can limit the channels that can be
connected to the monitor, so as to improve
stability and roaming performance. For
example, set the channels to 1, 6, and 11 on a
2.4 GHz network. Then the NIC will not scan or
select other channels.
The BG channel setting on the monitor must
match the AP channel setting.
Channel A Specified Options: all, specified, none
You can limit the channels that can be
connected to the monitor, so as to improve
stability and roaming performance.
The 5 GHz channel setting on the monitor