Mindray TE5, Руководство оператора

Страница: 32 / 323

2-8 System Overview
 Parts that can be used within patient environment:

Main unit;

Probes;

Footswitch;

Printers: MITSUBISHI P95DW-N, SONY UP-D25MD, SONY UP-D898MD, SONY UP-
X898MD.
NOTE: 1. If the ultrasound system cannot recognize the SONY UP-X898MD and SONY
UP-D898MD printers automatically, you may need to change the settings on the
printer: push <PUSH ENTER> to enter the main menu and select
[DIGITAL]->[DRIVER], and select [897].
2. USB cable length of the printers should be within 5-6 ft, otherwise the lifting of
the trolley will be affected if the USB cable is too short or even the ultrasound
system and the printer cannot be connected; or it’s not easily to arrange the
cable tidily if the USB cable is too long.
WARNING:
This system complies with IEC60601-1-2:2007, and its RF
emissions meet the requirements of CISPR11 Class B. In a
domestic environment, the customer or user should
ensure the system is connected to Class B peripheral
devices, otherwise RF interference may occur, and the
customer or user must take adequate measures
accordingly.
2.4 Introduction of Each Unit