Mindray TE5, Руководство оператора

Страница: 313 / 323

iWorks (Auto Workflow Protocol) G-1
Appendix G iWorks (Auto
Workflow Protocol)
G.1 Overview
The main objective of ultrasound workflow automation (iWorks) is to speed up exam times
and reduce the excessive number of user interface manual key strokes that can lead to
repetitive strain injuries over time. It automates a clinical workflow in common exam protocols
in a logical “step by step” manner. It also prevents missing important parts of examinations as
well as decreasing exam times.
A Protocol Event contains series workflow events (annotation comments, body marks and
measurements.
The system provides different protocol events based on the different application regions.
iWorks is an option.
G.2 Normal iWorks Basic Procedure
1. Enter the patient information.
2. Tap [iWorks] on the tool bar to enter the protocol selection screen, and tap the
corresponding protocol button to enter the status.
3. After the system enters the iWorks screen, the available protocol is displayed on the
lower part of the screen. Perform the scanning and saving according to the screen
prompt.
Perform measurements or add comments/body marks to the image according to the
screen prompt.
4. After a view scanning is complete, tap [Save Image] to switch to the next view according
to the screen prompt.
5. Repeat step 3 and step 4 to acquire all the necessary images.
6. After all views are finished, the system will prompt you to exit iWorks. Tap [Yes] to exit.