Komatsu WA480-8, Руководство по эксплуатации и техническому обслуживанию

Страница: 137 / 440

3.
According to the screen instructions, set the bucket hori-
zontal, lower the boom to the ground and press ENTER
switch.
The screen switches to STEP2.
4.
According to the screen instructions, raise the boom to the
highest position.
When this operation ends successfully, the bucket level
position is adjusted as intended.
5.
The screen returns to “Bucket Level Position Selection”
screen.
Once the above adjustment is done, if the bucket is installed to the machine, you are requested only to select
bucket type A to C without repeating the level position adjustment procedure.
“Bucket Level Position Initialization”
You can return the adjusted bucket level position to the default
value.
1.
Select a type of bucket you want to initialize from the
“Bucket Level Position Selection” screen, then press the
menu switch.
2.
Select the “Bucket Level Position Initialization”, then press
ENTER switch.
The initialization starts.
3.
Press ENTER switch on the confirmation screen to return
the level position of the selected bucket to the default.
When the initialization is not necessary, press RETURN
switch.
4.
The screen returns to “Bucket Level Position Selection”
screen.
OPERATION EXPLANATION OF COMPONENTS
3-69