Huawei UPS5000-H Series Скачать руководство пользователя страница 4

Страница: 4 / 395

Symbol

Description

Indicates a hazard with a low level of risk which,

if not avoided, could result in minor or moderate

injury.

Indicates a potentially hazardous situation which,

if not avoided, could result in equipment damage,

data loss, performance deterioration, or

unanticipated results.
NOTICE is used to address practices not related to

personal injury.

Supplements the important information in the

main text.
NOTE is used to address information not related

to personal injury, equipment damage, and

environment deterioration.

Change History

Changes between document issues are cumulative. The latest document issue

contains all updates made in previous issues.

Issue 05 (2021-10-13)

Added the three-phase three-wire model.

Issue 04 (2021-08-03)

●

Added the top air exhaust feature of the 1600 kVA model.

●

Added the S-ECO mode.

Issue 03 (2021-04-22)

Added the 1600 kVA model.

Issue 02 (2020-10-15)

●

Updated some monitoring and technical specifications.

●

Added the appendix Lifting Trolley.

Issue 01 (2020-07-15)

This issue is the first release.

UPS5000-H-(1200 kVA-1600 kVA)

User Manual (100 kVA Power Modules)

About This Document

Issue 05 (2021-10-13)

iii

Содержание UPS5000-H Series












































































































































































































































































































































































































Результаты поиска

Содержание UPS5000-H Series

Отзывы:

Похожие инструкции для UPS5000-H Series

Бренды по названию

Популярные бренды

Huawei UPS5000-H Series, Руководство пользователя

Результаты поиска

Содержание UPS5000-H Series

Отзывы:

Похожие инструкции для UPS5000-H Series

Бренды по названию

Популярные бренды