manualshive.com logo in svg

Honeywell Experion PKS Series A, Руководство пользователя, Страница: 367 / 560

Поделиться
Скачать
Honeywell Experion PKS Series A Скачать руководство пользователя страница 367

9. Experion PKS Host Registration 

9.1. Overview 

R400 

Experion PKS Series A Fieldbus Interface Module User's Guide 

367 

July 2010 

Honeywell 

Process Alert Handling and 
Confirmation 

The capability to confirm and display or record the 
process alert notifications. 

Device Alert Management 
Configuration 

The capability to configure the report VCR for device 
alert notifications. 

Device Alert Handling and 
Confirmation 

The capability to confirm and display or record the 
device alert notifications. 

Multi-bit Alert Support 

The capability to utilize the multi-bit alarm capability. 

Device Description Support  

DD Blocks and Parameters  

The capability to accept and utilize the definitions of 
blocks and their parameters from Version 4 DD files.   

With R400, this includes the requirement to support 
conditionals as restricted by the FF-901 specification.   

DD v4 Methods execution 

The capability to select and execute any DD method 
against its associated block. 

DD v4 Menus  
(with R400) 

The capability to display and navigate through menus 
as defined in a DD. 

DD v5 Visualizations, 
Methods  
(with R400) 

The capability to display and navigate through 
enhanced menus that contain charts, graphs, images, 
grids, and so on as defined in a DD.  The capability to 
select and execute any DD method against its 
associated block. 

DD v5 Persistent data  
(with R400) 

The capability to persist data as utilized by version 5 
DDs. 

Capability File Support 

The capability to import a Capability File for offline 
configuration. 

 

Conditional support for FF devices 

Conditionals are a set of rules that define or affect the parameter attributes like display 
format, validity, handling, minimum value, maximum value and so on. When you modify 
the default value of a parameter, the other parameter’s attribute, which are conditionally 
affected by this parameter, also changes. 

To support Conditional evaluation, the Parameter Definition Editor (PDE) is enhanced in 
Control Builder. 

For more information, see 

Parameter Definition Editor Reference.

 

Содержание Experion PKS Series A

















































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов