GE M
EDICAL
S
YSTEMS
D
IRECTION
2380207
, R
EVISION
7
LOGIQ™ 5 PRO S
ERVICE
M
ANUAL
8 - 182
Section 8-11 - Installing Base Software Load Image
8-11-1 Installing Base Software Load Image CD
15.). Approx. ten (10) minutes later, the gray colored screen appears. Eject the
“ Base Software Load
Image CD Disk 1 of 2 ”
from the drive and Insert the “
Base Software Load Image CD Disk 2 of
2”
. And then Select to ‘OK’ button to continue.
16.)Approx. ten(10) minutes later, the following screen appears. Eject the
” Base Software Load Image
CD 2 of 2”
from the drive
17.)After removing the CDROM from the drive, Press ALT + CTRL + DEL key
18.)Turn on the system.
NOTE:
After installation Base Software Load Image CDs, the “General failure reading drive A .. Abort,
Retry, Fail?” message can be appeared, but Ignore it! All procedure would be successfully done
NOTE:
Remove the CD-ROM from the drive. Otherwise you will be repeating the Base System
Software Load process.
Figure 8-210 Span Volume [1] Done
Figure 8-211 Screen
Содержание LOGIQ 5 PRO
