GE FC091194, Руководство по обслуживанию

Страница: 483 / 510

GE M
EDICAL
S
YSTEMS
D
IRECTION
FC091194, R
EVISION
02 V
IVID
7 / V
IVID
7 PRO S
ERVICE
M
ANUAL
Chapter 10 - Periodic Maintenance 10 - 7
10-5-2-2 Peripheral/Option Checks
If any peripherals or options are not part of the system configuration, the check can be omitted. Refer
to the User Manual for a list of approved peripherals/options.
10-5-3 Input Power
10-5-3-1 Mains Cable Inspection
10-5-4 Cleaning
10-5-4-1 General Cleaning
Table 10-6 GE Approved Peripheral/Hardware Option Functional Checks
Step Item Description
1 VCR
Verify record/playback capabilities of the VCR. Clean heads and covers if necessary.
2 B/W Printer Verify hardcopy output of the B/W video page printer. Clean heads and covers if necessary.
3 Color Printer Verify hardcopy output of the Color video page printer. Clean heads and covers if necessary.
4 DICOM
Verify that DICOM is functioning properly. Send an image to a DICOM device.
5 InSite/iLinq
Verify that InSite is functioning properly. Ensure two-way remote communications.
(Warranty & Contract Customers only)
7 Footswitch
Verify that the footswitch is functioning as programed. Clean as necessary.
8 ECG
Verify basic operation with customer
Table 10-7 Mains Cable Inspection
Step Item Description
1 Unplug Cord Disconnect the mains cable from the wall and system.
2 Inspect
Inspect it and its connectors for damage of any kinds.
3 Verify
Verify that the LINE, NEUTRAL and GROUND wires are properly attached to the terminals, and that no
strands may cause a short circuit.
4 Verify
Inlet connector retainer is functional.
Table 10-8 General Cleaning
Step Item Description
1 Console
Use a fluid detergent in warm water on a soft, damp cloth to carefully wipe the entire system. Be careful
not to get the cloth too wet so that moisture does not enter the console.
2 Probe Holder Clean probe holders. (they may need to be soaked to remove excess gel).