GE FC091194, Руководство по обслуживанию

Страница: 144 / 510

GE M
EDICAL
S
YSTEMS
D
IRECTION
FC091194, R
EVISION
02 V
IVID
7 / V
IVID
7 PRO S
ERVICE
M
ANUAL
4 - 10 Section 4-2 - General Procedures
2.) Select 5 1/4 MO DISK in the Eject Device menu to eject the MO Disk.
3.) Remove the ejected MO Disk from the MO Drive and store it in it’s cover box in a safe place.
4-2-3-4 Install CD-R Disk in CD Drive
NOTE: CD-RW disks are NOT supported by Vivid 7 / Vivid 7 PRO, but CD-R disks may be used.
1.) Press the Eject button on the right side of the CD Drive once to open the disk tray.
2.) Put a CD-R disk in the disk tray with the label side facing up.
3.) Press the Eject button once to close the disk tray. The disk is available for reading, formatting or
writing, dependant on the disk you used, after a few seconds.
4-2-3-5 Eject and Remove CD-R Disk from CD Drive
1.) Eject the CD-R Disk, using one of the methods described in the following steps:
a.) In some cases, the CD-R Disk is ejected automaticly.
b.) If not automaticly ejected, use manual ejection method:
-
Select Eject button on the screen, or
- Press ALT + E on the alphanumeric keyboard to display the Eject Device menu.
2.) Select CD-REWRITEABLE in the Eject Device menu to eject the CD-R Disk.
3.) Remove the ejected CD-R Disk from the CD Drive and store it in it’s cover in a safe place.
4-2-4 Labeling Removable Media
Before you start to format any Removable Media, be sure about what naming convention you will use
for labelling.
• Use a logical name and make sure to physically label each Removable Media.
• Verify that each Removable Media gets a unique name. Maximum eleven (11) characters may be
used for the label name.
• Remember that MO Disks have two sides, Side A and Side B. Each Side must have a unique name.
Example: MO Disks for storing images may be labeled "IMAGE_1A" (Side A on MO Disk #1), "IMAGE_1B (Side
B on MO Disk #2), "IMAGE_2A" ...
NOTICE
Do not eject the CD-R Disk using the button on front of the CD Drive.
Figure 4-8 The Eject Device menu