Fuji Electric FRENIC-Ace series, Руководство пользователя

Страница: 656 / 788

11.11 AC Reactors (ACRs)
11-52
Table 11.11-1 AC Reactor (ACR)
Power supply
voltage
Nominal
applied
motor
(kW)
Nominal
applied motor
(HP)
AC reactor type
Rated
current (A)
Reactance (mΩ/phase)
Coil resistance
(mΩ)
Generated
loss (W)
50Hz 60Hz
Three-phase
200V
0.1 1/8
ACR2-0.4A 3 917 1100 -
2.5
0.2 1/4 5
0.4 1/2 10
0.75 1 ACR2-0.75A 5 493 592 - 12
1.5 2 ACR2-1.5A 8 295 354 - 14
2.2 3 ACR2-2.2A 11 213 256 - 16
3.0 4
ACR2-3.7A 17 218 153 - 23
3.7 5
5.5 7.5 ACR2-5.5A 25 87.7 105 - 27
7.5 10 ACR2-7.5A 33 65 78 - 30
11 15 ACR2-11A 46 45.5 54.7 - 37
15 20 ACR2-15A 59 34.8 41.8 - 43
18.5 25 ACR2-18.5A 74 28.6 343 - 51
22 30 ACR2-22A 87 24 28.8 - 57
30 40 ACR2-37 200 10.8 13 0.5 28.6
Three-phase
400V
0.4 1/2
ACR4-0.75A 2.5 1920 2300
- 5
0.75 1 - 10
1.1 1-1/2
ACR4-1.5A 3.7 1160 1390 - 11
1.5 2
2.2 3 ACR4-2.2A 5.5 851 1020 - 14
3.0 4
ACR4-3.7A 9 512 615 - 17
3.7 5
5.5 7.5 ACR4-5.5A 13 349 418 - 22
7.5 10 ACR4-7.5A 18 256 307 - 27
11 15 ACR4-11A 24 183 219 - 40
15 20 ACR4-15A 30 139 167 - 46
18.5 25 ACR4-18.5A 39 114 137 - 57
22 30 ACR4-22A 45 95.8 115 - 62
30 40 ACR4-37 100 41.7 50 2.73 38.9
37 50
ACR4-37
100 41.7 50 2.73 55.7
45 60 ACR4-55 135 30.8 37 1.61 50.2
55 75 ACR4-55 135 30.8 37 1.61 70.7
75 100 ACR4-75 * 160 25.8 31 1.16 65.3
90 125 ACR4-110 250 16.7 20 0.523 42.2
110 150 ACR4-110 250 16.7 20 0.523 60.3
132 200 ACR4-132 * 270 20.8 25 0.741 119
160 250
ACR4-220 561 10 12 0.236
56.4
200 300 90.4
220 350 107
250 400
ACR4-280 825 6.67 8 0.144
96.4
280 450 108
315 475
ACR4-355 825 6.67 8 0.144 194
355 500
Single-phase
200V
0.1 1/8
ACR2-0.4A 3 917 1100 -
5
0.2 1/4 10
0.4 1/2 ACR2-0.75A 5 493 592 - 12
0.75 1 ACR2-1.5A 8 295 354 - 14
1.5 2 ACR2-2.2A 11 213 256 - 16
2.2 3 ACR2-3.7A 17 218 262 - 23
3.7 5 ACR2-5.5A 25 87.7 105 - 27
* Cool this reactor using a fan with 3 m/s or more WV (Wind Velocity).
Note: Generated losses listed in the above table are approximate values that are calculated according to the
following conditions:
• The power supply is three-phase 200V/400 V 50 Hz with 0% interphase voltage unbalance ratio.
• The capacity of the power supply used is the larger of either 500 kVA or 10 times the rated capacity of the
inverter.
• The motor is a 4-pole standard model at full load (100%).