Fuji Electric FRENIC-Ace series, Руководство пользователя

Страница: 276 / 788

5.3 Description of Function Codes
5-106
<Example of Operation Time Scheme>
■
“UP” (Increase output frequency) and “DOWN” (Decrease output frequency) commands -- UP and
DOWN (Function code data = 17 and 18)
• Frequency command: Turning the terminal command “UP” or “DOWN” ON causes the output frequency to
increase or decrease, respectively, within the range from 0 Hz to the maximum
frequency. (

Function code F01 data = 7)
• PID command: Turning the terminal command “UP” or “DOWN” ON causes the PID command value to
increase or decrease, respectively, within the range from 0 to 100%.
(

Function code J02 (data= 3)
■
Allow function code editing – “WE-KP” (Function code data = 19)
Turning the terminal command “WE-KP” OFF protects function code data from accidentally getting changed by
pressing the keys on the keypad. Only when this terminal command is ON, you can change function code data
from the keypad. (

Function code F00)
Inverter
operation
Run
Stop
Run command
Alarm
Select commercial power
Inverter primary
Inverter secondary
delay timer T3
(on-delay)
Inverter secondary
Switch to commercial
power delay timer T1
(off-delay)
Forward run command
Coast to a stop
Commercial power circuit
Inverter output and
motor rotation
Switch to commercial
power delay timer T2
(off-delay)
Switch to commercial power
Inverter
Commercial power
Inverter
Alarm generated
Commercial power
operation
Inverter
operation
Switching to commercial
power due to alarm
generated during inverter
operation
Motor coast to a stop
Inverter output
coast to a stop
Motor coast to a stop
Motor rotation
Harmonization
Motor coast to a stop
Normal
acceleration