Fuji Electric FRENIC-Ace series, Руководство пользователя

Страница: 387 / 788

5.3 Description of Function Codes
5-217
FU
NCT
IO
N
C
O
DE
S
Chap 5
[ 7 ] Positioning control with pulse counter
J73 to J88 Positioning control parameters
This function allows simple positioning control with pulse counter and requires the PG interface card.
The inverter internally counts the feedback pulses and controls the motor so that the control object moves from the
previously specified start point, decelerates and switches to the creep speed operation to arrive at the specified
stop position.
■
Function Code List
Table 5.3-22 lists the function codes to be used for positioning control.
Table 5.3-22 Function Codes to be used for positioning control
Code Name Data setting range Unit Default
setting
Change
when
running
E01
to
E05,
E98,
E99
Terminal [Xn] Function
42 (1042): Activate the limit switch at start point, “ LS ”
43 (1043): Start/reset, “ S / R ”
44 (1044): Switch to the serial pulse receiving mode,
“ SPRM ”
45 (1045): Enter the return mode, “ RTN ”
— — N
E20,
E21,
E27
Terminal [Y1] Function
Terminal [Y2] Function
Terminal [30A/B/C] Function
80 (1080): Stop position override alarm, “
OT
”
81 (1081): Under positioning, “ TO ”
82 (1082): Positioning completed, “ PSET ”
83 (1083): Current position count overflowed, “ POF ”
— — N
J73
Positioning Control
(Start timer)
0.0: Disable
0.1 to 1000.0: Preset time
s 0.0 Y
J74 (Start point, upper digits) -999 to 999 — 0 Y
J75 (Start point, lower digits) [P], 0 to 9999 *1 p 0 Y
J76 (Preset point, upper digits) -999 to 999 — 0 Y
J77 (Preset point, lower digits) [P], 0 to 9999 *1 p 0 Y
J78
(Creep speed switch point,
upper digits)
0 to 999 p 0 Y
J79
(Creep speed switch point,
lower digits)
0 to 9999 p 0 Y
J80 (Creep speed) 0 to 500 Hz 0 Y
J81 (End point, upper digits) -999 to 999 p 0 Y
J82 (End point, lower digits) 0 to 9999 p 0 Y
J83 (Completion range) 0 to 9999 p 0 Y
J84 (End timer)
0.0: Disable.
0.1 to 1000.0: Preset time
s 0.0 Y
J85 (Coasting compensation) 0 to 9999 p 0 Y
J86
(End point, serial pulse input
format)
0: Direction and pulse
1: Forward and reverse pulse
— 0 Y
J87
(Preset positioning
requirement)
0: Allow to preset at the forward rotation only
1: Allow to preset at the reverse rotation only
2: Allow to preset at any rotation direction
— 0 N
J88
*2
(Direction of detected position)
0: Does not switch the direction of detected position
1: Switch the direction of detected position (Multiply by
“-1” the detected position)
— 0 N
*1 [P]: Current position (Absolute position) Switching between “0” and [P] requires the simultaneous keying: + keys
from “0” to [P] and + keys from [P] to “0.”
*2 In case of wrong wiring of the PG, inverts the position detection; direction, using J88 it is to possible correct the direction
without rewiring.