Fuji Electric FRENIC-Ace series, Руководство пользователя

Страница: 303 / 788

5.3 Description of Function Codes
5-133
FU
NCT
IO
N
C
O
DE
S
Chap 5
Related data is the following. These data are displayed and submitted with polarity. Judge the meaning of the
polarity by E49 setting.
Torque data Data Related data
Keypad LED monitor
E43=8 Calculated torque
E43=23 Torque current
Keypad drive monitor
3_04
Calculated torque
Keypad alarm information
6_03
Calculated torque when alarm
OPC-AIO o90 = 4 Output torque (only o93=0:Bipolar)
Torque monitor function code
M02 Torque direction
M03 Torque current direction
M07 Output torque
M08 Torque current
M28 Torque direction when alarm
M29 Torque current direction when alarm
M33 Output torque when alarm
M34 Torque current when alarm
W07 Calculated torque
W24 Torque current
X23 Calculated torque when alarm
X63 Calculated torque when alarm
Z03 Calculated torque when alarm
Z53 Calculated torque when alarm
Z81 Output torque
E50 Display coefficient for speed monitor
E50 specifies the coefficient that is used when the load shaft speed or line speed is displayed on the LED monitor.
(Refer to the description of E43.)
Load shaft speed [min
-1
] = (E50: Display coefficient for speed monitor) × (Output frequency Hz)
Line speed [m/min] = (E50: Display coefficient for speed monitor) × (Output frequency Hz)
• Data setting range: 0.01 to 200.00
E51 Display coefficient for “Input watt-hour data”
E51 specifies a display coefficient (multiplication factor) for displaying the input watt-hour data (
5_10
) in a part of
maintenance information on the keypad.
Input watt-hour data = Display coefficient (E51 data) × Input watt-hour (100kWh)
• Data setting range: 0.000 (cancel/reset) 0.001 to 9999
Setting E51 data to 0.000 clears the input watt-hour and its data to “0.” After clearing, be sure to restore
E51 data to the previous value; otherwise, input watt-hour data will not be accumulated.