Fuji Electric FRENIC-Ace series, Руководство пользователя

Страница: 338 / 788

5.3 Description of Function Codes
5-168
Table 5.3-13 Command sources specified by y98 (Bus link function, Mode selection)
y98 data Frequency command Run command source
0 Follow H30 data Follow H30 data
1 Via fieldbus (option), built-in CANopen Follow H30 data
2 Follow H30 data Via fieldbus (option), built-in CANopen
3 Via fieldbus (option), built-in CANopen Via fieldbus (option), built-in CANopen
Table 5.3-14 H30 and y98 settings by combination of sources
Frequency command
Inverter itself
Via RS-485
communications
link port 1
Via RS-485
communications
link port 2
Via fieldbus
(option) and built in
CAN
R
un c
om
m
and
sour
ce
Inverter itself
H30 = 0
y98 = 0
H30 = 1
y98 = 0
H30 = 4
y98 = 0
H30 = 0 (1, 4)
y98 = 1
Via RS-485
communications link
(port 1)
H30 = 2
y98 = 0
H30 = 3
y98 = 0
H30 = 5
y98 = 0
H30 = 2 (3, 5)
y98 = 1
Via RS-485
communications link
(port 2)
H30 = 6
y98 = 0
H30 = 7
y98 = 0
H30 = 8
y98 = 0
H30 = 6 (7, 8)
y98 = 1
Via fieldbus (option
and built-in CAN)
H30 = 0 (2, 6)
y98 = 2
H30 = 1 (3, 7)
y98 = 2
H30 = 4 (5, 8)
y98 = 2
H30 = 0 (1 to 8)
y98 = 3
 For details, refer to the RS-485 Communication User’s Manual, the Field Bus (Option) Instruction Manual or
Chapter 9.
• When the terminal command “LE” (“Select link operation (RS-485, BUS option)”) is assigned to a digital input
terminal, turning “LE” ON makes the settings of H30 and y98 enabled. When LE is OFF, those settings are
disabled so that both frequency commands and run commands specified from the inverter itself take control.
(Function codes E01 to E05, data = 24)
No “LE” assignment is functionally equivalent to the “LE” being ON.