Fuji Electric FRENIC-Ace series, Руководство пользователя

Страница: 100 / 788

3.3 Running Mode
3-6
*1 A value exceeding 9999 cannot be displayed as is on the 4-digit LED monitor screen, so the LED monitor
displays one-tenth of the actual value with the x10 LED lit.
*2 Calculated torque 100% is equal to the motor rated torque. For the calculation formula of the motor rated
torque, refer to E.2 “Calculated formula” (1) in Appendix E “Conversion from SI Units.”
*3 When the LED monitor displays the output voltage, the 7-segment letter
u
in the lowest digit stands for the
unit of the voltage “V.”
*4 When the LED monitor displays the motor output, the unit LED indicator “kW” blinks.
*5 When the LED monitor displays the load factor, the 7-segment letter
;
in the lowest digit stands for “%.”
*6 These PID related items appear only under the PID control specified by function code J01 (= 1, 2 or 3).
*7 When the LED monitor displays a PID command or its output amount, the dot (decimal point) attached to the
lowest digit of the 7-segment letter blinks.
*8 When the LED monitor displays a PID feedback amount, the dot (decimal point) attached to the lowest digit of
the 7-segment letter lights.
*9 The analog input monitor appears only when the analog input monitor function is assigned to one of the
analog input terminals by one of function codes E61 to E63 (= 20). Specify the unit with C58, C64 and C70.
When the displayed value is less than -999, the x10 LED is lit.
*10
0
appears under the V/f control.
*11 The Timer screen appears only when the timed operation is enabled with function code C21 (C21 = 1).
The monitoring signals for the monitor items such as output frequency and output current can be filtered
with function code E42 (LED display filter). Increase the E42 data if the monitored values are unstable
and unreadable due to fluctuation of load.
(

Function code E42)