FATEK SD3 Series, Инструкция по эксплуатации, Страница: 232 / 396

90
5. Setting Parameters
SD3 Series Instruction Manual
5. Parameters
No. 645.3
Homing:
Re-detection of home position dog
Settings Default Characteristics
0, 1 0
Function
Use
Use this parameter, after detecting dog-front-end, to re-detect the dog-front-end
at a speed specified with the homing creep speed parameter.
Settings Re-detecting motion
0 Disable
1 Enable
Dog
Position
Motion to detect dog again
Origin
Homing speed
Speed
HOMING:
Creep Speed
Prerequisite Homing: Home reference signal selection (No.645.0): 2(home dog-front-end)
Common Position Control Pulse Train Command Position Control Internal Command
Velocity Control Analog Command Velocity Control Internal Command Torque Control Analog Command
Communication Operation Mode Operation Control
Alarm Detection Tuning Homing
Torque Limit Deceleration Stop and so on Vibration Control
Switch Selection Numeric Value
Control Power Cycle 2-Byte Data 4-Byte Data
-