FATEK SD3 Series, Инструкция по эксплуатации, Страница: 193 / 396

51
5
Setting Parameters
5. Setting Parameters
SD3 Series Instruction Manual
5. Parameters
5. Parameters
No. 87.0
Position deviation error detection:
Value
Range Default Characteristics
0 to 2,147,483,647
196,608
[encoder pulse]
Function
Use
This parameter sets a threshold value for a position deviation error detection.
The higher the value, the less likely to detect position deviation error.
(The initial value of 196,608 is equivalent to pulse count of rotor 1.5 rotations.)
Prerequisite Position deviation error detection: Switch (No.65.0) = 1 (Enable)
Related To No.65.0, No.89.0
No. 89.0
Position deviation error detection:
Delay time
Range Default Characteristics
0 to 32,767 (See below)
Function
Use
This parameter sets a delay time for a position deviation error (
Alarm
No.6) to be
output after the position deviation exceeded the setting of [Position deviation error
detection value (No.87.0)]
The higher the value, the longer it takes for the error to be output.
■ Default
Motor Capacity Default Converted to Time
50 W to 750 W 250 [160 µs]
40 ms
1 kW to 2 kW 200 [200 µs]
Prerequisite Position deviation error detection: Switch (No.65.0) = 1 (Enable)
Related To No.65.0, No.87.0
No. 90.0
Speed deviation error detection:
Value
Range Default Characteristics
0 to 32,767 (See below)
Function
Use
This parameter sets a threshold value for a speed deviation error detection.
The higher the value, the less likely to detect a speed deviation error.
■ Default
Motor Capacity Default Speed Conversion
50 W to 750 W 524 [encoder pulse/160 µs]
1,499 r/min
1 kW to 2 kW 655 [encoder pulse/200 µs]
Prerequisite Speed deviation error detection - Switch (No.65.1) = 1 (Enable)
Related To No.65.1, No.91.0
No. 91.0
Speed deviation error detection:
Delay time
Range Default Characteristics
0 to 32,767 (See below)
Function
Use
This parameter sets a delay time for a speed deviation error (
Alarm
No.5) to be
detected after the speed deviation exceeded the setting of "Speed deviation error -
Detection value"(No.90.0).
The higher the value, the longer the error detection time.
■ Default
Motor Capacity Default Converted to Time
50 W to 750 W 250 [160 µs]
40 ms
1 kW to 2 kW 200 [200 µs]
Prerequisite Speed deviation error detection - Switch (No.65.1) = 1 (Enable)
Related To No.65.1, No.90.0
-
-
-
-